How To Make A Double Macrame Plant Hanger
Our house came with a kitchen that'southward a bit of a corrective fixer-upper. It'southward definitely isn't the worst kitchen I've ever seen, and we've already fabricated some upgrades, but the days of those poorly-stained dark wood cabinets are numbered. They desperately need a glaze of paint, only until nosotros get effectually to it, in that location are a lot of picayune ways to brand the kitchen expect nicer, like lots of greenery. The room came with little hooks in front of the kitchen sink window, and I doubtable that they were used for some sort of window treatment, only I decided to use them for plants. When I came across these cute bowls on clearance at Westward Elm, I grabbed a few to make into planters.
Macrame Establish Hangers
Materials:
Paracord -I used 32 anxiety per planter of 550 nylon paracord, similar to this kind (which comes in a ton of great colors!)
Metal ring
Pair of scissors
Measuring tape
Masking tape
Matches, lighter, and/or candle
Bowl
Plant
Soil
Pebbles
Steps:
Note: Before I trimmed the excess rope ends, the planter was 36 inches long, only the final length is about 27 inches. The following knot locations worked for my bowl, but you may need to adjust the distances between the knots for your particular bowl or pot. If you want to make your hanger longer, you'll want to get-go with a few more anxiety of cord.
1. Cut 4 pieces of paracord, eight anxiety long each. Cover the cutting ends with masking tape so they won't unravel.
2.Gather upward the cords and discover the centre. Fold them in one-half, slip them through the metal ring, and then put the ends through the string loop. This is a lark's head knot.
3. For all of the decorative knots, I used a Josephine knot. This page has a really good diagram of how to practise it. I colorized one of the ropes in the photos beneath to help you see how information technology's washed. It looks complicated, simply later on you've washed it a few times it becomes pretty fun and easy. It helps to practice with some scrap string.
4. I tied a ready of iv knots ten inches from the bottom of the ring between adjacent pieces of rope.
5. Now information technology'southward time to swap partners. Tie another set of iv knots, five inches beneath the first set, between adjacent pairs of rope.
six. Tie iv more than knots, ii.5 inches beneath the last set, then gather all of the cord and loosely knot information technology together with an overhand knot several inches below the final prepare of knots.
vii. Put your bowl in the holder and test the fit. Adjust the location of the bottom knot if necessary.
8. Trim the bottom cords so that they're even, and then melt the ends by property each i near a flame. Be careful, don't burn down yourself or set annihilation on burn!
9. Place a layer of pebbles in the bottom of your bowl, so establish your constitute in it.
10. Hang up your new planter someplace where it'll go plenty of calorie-free. Don't forget to water information technology!
Source: http://diyinpdx.com/2014/07/10/diy-macrame-planters/
Posted by: vinsonarmet1952.blogspot.com
0 Response to "How To Make A Double Macrame Plant Hanger"
Post a Comment